Awaiting product image

Panic Room

$300.00

1- True bypass footswitch turns pedal on/off
2- 2.1mm DC power Jack 9VDC negative center pin
3- ¼ mono input jack
4- ¼” mono output jack
5- LED indicates if pedal is on/off
6- Stress Knob: must always remain turn down and not be used
7- VCO gain Knob: controls the saturation on the VCO
8- Gain Knob : controls the gain after the VCO
9- Auto Toggle: down puts unit into automation mode, which allows the modulation to be controlled by the white LED on top
10- Mod Knob: controls the modulation frequency, CCW is low frequency CW is high freuency
These waveform controls are the automation mode only. Follow the LED.
11- Frequency Knob: Controls the speed of the white LED
12- Wave 0 Toggle: Toggle right to for square wave, and toggle left for a rounder square wave
13- Wave 1 Toggle: Toggle right to for sine wave, and toggle left for a triangle wave
14- Cycle Knob: Controls the duty cycle between the high and low gain channel

Category:

Description

Time to stress out your pedal board. Ever knob and switch turn is chaos in the Panic Room. Make your instrument sound like is possessed synthesizer. Range from low end modulation to high end, blend with ultra distortion…. and never move the stress knob. Like many of the 2mult pedals you are not in control of what the pedal does, let the pedal do the work.

Industrial music maker in a box.

Related products