Rumble Strips

Rumble Strips

$250.00

Style: Distortion Toggler

1- True bypass footswitch turns pedal on/off

2- 2.1mm DC power Jack 9VDC negative center pin

3- ¼ mono input jack

4- ¼” mono output jack

5- Yellow LED indicates if pedal is on/off

6- Blue LEDs indicates which distortion line is on or off

7- High Gain: Controls the gain on the louder channel which corresponds with the upper blue LED

7- Low Gain: Controls the gain on the lower channel which corresponds with the lower blue LED

8- Frequency: Controls the speed of the toggler

9- Wave 0: Toggle right to for square wave, and toggle left for a rounder square wave

10- Wave 1: Toggle right to for sine wave, and toggle left for a triangle wave

11- Duty: Controls the duty cycle between the high and low gain channels

Available on backorder

Category:

Description

On the coast highway, alone early morning, with fog rolling in under the moonlight. There’s a sign to warn you to slow, but you persist and twist the dual channel drive up higher. As your wheels move they come across the strips in the road. Your  bike chitters and chatters aggressively through the whoops, but you’re completely under control. Chitter it up or chatter it down. Rumble Strips is here and you can recreate this experience through the power of your picking hand and not have to risk any speeding tickets with double the fines in a construction zone.

Related products